RenovaDrain Retrofit Roof Drain
The new five-second, no-tools, multiple-seal, retrofit roof drain which can be installed quickly and easily with single-ply roofing, modified bitumen and BUR using the stainless steel clamp ring.
Existing drains stay where they are. The RenovaDrain is just pushed through into the down pipe. Less risk and highly cost-effective. Multiple lip seals moulded onto the outside of the spigot give complete protection from leaking if the drain backs up. It’s fitted by just pushing the new drain down through the old. To install with extra layers of insulation - just stop pushing when you reach the correct level.
Product Details Back to top
Product Specification
RenovaDrain can be installed quickly and easily with single ply using the stainless steel clamp ring and fitted PVC flange. Installed by pushing into the
bore of the existing pipe work, usually without removing the existing drain. Made of polypropylene/rubber co-moulding. Comes with multi-ribbed seal,
stainless steel clamp ring, domed grating and temporary blanking plate. Flow rate tested to DIN EN 1253.
| Product Name | To fit INSIDE pipe size |
|---|---|
| RenovaDrain 63T with stainless steel clamp ring (R/D-RENOVA-63T-STD- 75MM/DN70) |
75 mm (DN70) |
| RenovaDrain 63T with stainless steel clamp ring (R/D-RENOVA-63T-STD-4’’/ DN100) |
110mm (DN100/4’’) |
| RenovaDrain 63T with stainless steel clamp ring (R/D-RENOVA-63T-STDDN125) |
130mm (DN125) |
| RenovaDrain 63T with stainless steel clamp ring (R/D-RENOVA-63T-STD-6’’/ DN150) |
160mm (DN150/6’’) |
| RenovaDrain 63T with PVC welding flange (R/D-RENOVA-63T-PVC- 75MM/DN70) |
75 mm (DN70) |
| RenovaDrain 63T with PVC welding flange (R/D-RENOVA-63T-PVC-4’’/ DN100) |
110mm (DN100/4’’) |
| RenovaDrain 63T with PVC welding flange (R/D-RENOVA-63T-PVCDN125) |
130mm (DN125) |
| RenovaDrain 63T with PVC welding flange (R/D-RENOVA-63T-PVC-6’’/ DN150) |
160mm (DN150/6’’) |
