FLEET Primer WMP
Sprayable Metal Primer
Fleet Primer WMP 174 S is a primer that acts as a bonding agent between metal substrates and Fleet PMMA waterproofing or highbuild systems.
Advantages
- Very good bonding properties between metal substrates and the Fleet systems that are then applied.
- Easy to apply
- Adheres to all standard metal substrates
- Very high opacity
- Durable corrosion protection on iron and steel
- Very fast drying
- Spray jet is able to reach areas that are not easily accessible
- Very good water resistance
Usage
- Bonding agent between metal substrates
- Fleet waterproofing products
- High build systems
Product Details Back to top
Product Specification
| Packaging | 500 ml spray can |
|---|
Technical Data
| TEMPERATURE RANGE IN °C |
|---|
| Air | Substrate* | Material |
| +3 to +35 | +3 to +35* | +3 to +30 |
* The substrate temperature must be at least 3°C above the dew point during application and curing
| DRYING TIME |
|---|
| TEMPERATURE | DRYING TIME |
| 30°C | approx. 20 minutes |
| 20°C | approx. 30 minutes |
| 10°C | approx. 40 minutes |
| 3°C | approx. 45 minutes |
Applications Back to top
- Shake the can for at least 2 minutes prior to application.
- Then spray the primer onto the substrate to be coated, holding the nozzle about 15-20 cm from the surface. Avoid applying excessive amounts as this could impair the adhesive strength. Optimum results, including active corrosion protection, are obtained at a layer thickness of around 30 μm.
- Once the primer has been applied, hold the can upside down and press the sprayer briefly to clear the riser and prevent it from clogging. The primer should be overlaid with the next Fleet products within 8 hours of its application. If this time is exceeded, one further layer of primer may be applied, as described above.
