FLEET Primer P
Porous Surfaces
Fleet Primer P is a fast-reactive primer used as a barrier on absorbent substrates in preparation for the later application of Fleet waterproofing or surfacing products.
Fleet Primer P is used for the pre-treatment (primer and barrier) of slightly absorbent mineral and timber substrates (concrete, screed, wood etc.) in preparation for the later application of Fleet waterproofing / surfacing products.
Advantages
- Easy to apply
- Fast-curing
- Very good adhesion on absorbent substrates
- Hydrolysis and alkali-resistant
- Solvent-free
Usage
Fleet Primer P is used for the pre-treatment (primer and barrier) of slightly absorbent mineral and timber substrates (concrete, screed, wood etc.) in preparation for the later application of Fleet waterproofing / surfacing products.
Product Details Back to top
Product Specification
| Packaging |
Summer: 5.00 kg Fleet Primer P |
Winter: 5.00 kg Fleet Primer P |
|---|---|---|
|
Summer: 10.00 kg Fleet Primer P |
Winter: 10.00 kg Fleet Primer P |
Technical Data
| Density | 1.06 g/cm³ |
|---|
Applications Back to top
For mixing the product
- Twin-paddle stirrer
For applying the product
- Sheepskin roller
- Brush (only for areas not accessible with roller)
Mixing
First stir the tub contents thoroughly. Then add the catalyst while stirring the resin at the slow speed setting and mix for 2 minutes. Make sure that the product on the base and sides of the container is mixed in.
At product temperatures < 10 °C the product should be stirred for 4 minutes, as the catalyst will take longer to dissolve.
Application
Use the sheepskin roller to apply an even film-forming coat of primer. Avoid creating puddles of primer. Once the coating has cured, apply a second coat to cover any defects (bubbles, areas not fully coated).
