FLEET Primer A2
Asphalt Surfaces
Fleet Primer A2 is a fast-reactive primer used as a barrier on asphalt substrates in preparation for the later application of Fleet waterproofing or surfacing products.
Advantages
- Very good adhesion to asphalt substrates
- Easy to apply
- Can also be applied at sub-zero temperatures
- Hydrolysis- and alkali-resistant
- Fast-curing
- Solvent-Free
Usage
- Pre-treatment of asplhalt substrates
Product Details Back to top
Product Specification
| Packaging |
Summer: 10.00 kg Fleet Primer A2 |
Winter: 10.00 kg Fleet Primer A2 |
|---|
Technical Data
| TEMPERATURE RANGE IN °C |
|---|
| Air | Substrate* | Material |
| -5 to +35 | -5 to +50* | +3 to +30 |
*The substrate temperature must be at least 3°C above the dew point during application and curing
| FLEET PRIMER A2 (at 20°C, 3% catalyst) |
|
| POT LIFE | approx. 15 minutes |
| RAIN-PROOF AFTER | approx. 30 minutes |
| CAN BE WALKED ON / OVERCOATED AFTER | approx. 45 minutes |
| CURING TIME | approx. 3 hours |
Applications Back to top
For mixing the product
- Twin-paddle stirrer
For applying the product
- Sheepskin roller
- Brush (only for areas not accessible with roller)
Substrate preparation
The Primer must only be applied to a prepared substrate. Please refer to the appropriate application guide for information about correct surface preparation.
Mixing
First stir the tub contents thoroughly. Then add the catalyst while stirring the resin at the slow speed setting and mix for 2 minutes. Make sure that the product on the base and sides of the container is mixed in.
At product temperatures < 10 °C the product should be stirred for 5 minutes, as the catalyst will take longer to dissolve.
Application
Use the sheepskin roller to apply an even film-forming coat of primer. Avoid creating puddles of primer. Once the coating is cured, apply a second coat to cover any defects (bubbles, areas not fully coated)
