Enquiry

Get In Touch

FLEET Cover S2B
FLEET Cover S2B

FLEET Cover S2B

Wearing Layer

Fleet Cover S2B is a flexible self-levelling mortar for utilised areas, such as roof terraces, balconies and multi-storey car parks. In Fleet waterproofing systems it serves as protection for the waterproofing layer. When used in surfacing systems it is applied as a thick-film coating.

Advantages

  • Versatile product – can be used as waterproofing protection, thick-film layer and equalising layer
  • Product for areas exposed to mechanical loads (pedestrians, vehicles)
  • Cost-efficient solution for surfacing floor areas without cracks or with only hairline cracks
  • Fully bonded to the substrate, therefore no flow paths for water
  • Easy and fast application
  • Fast-curing
  • Can also be applied at sub-zero temperatures
  • Can be applied to almost all substrates, including variable substrates (when combined with Fleet Primers)
  • Solvent-free

Usage

  • Protective layer
  • Thick-film coating
  • Equilising mortar

Product Details Back to top

Product Specification

Packaging  
 

Summer:  

10.00 kg   Fleet Cover S2 B
23.00 kg   Fleet Cover S2 A (powder component)
  0.20 kg   Catalyst (2 x 0.1 kg)
33.20 kg

 

Winter:  

10.00 kg   Fleet Cover S2 B (base resin)
23.00 kg   Fleet Cover S2 A (powder component)
  0.40 kg   Catalyst (4 x 0.1 kg)
33.40 kg

Technical Data

Denisty  
Fleet Cover S2 1.76 g/cm³
Fleet Cover S2 B 1.00 g/cm³
Fleet Cover S2 A 2.64 g/cm³

Applications Back to top

For mixing the product

  • Twin-paddle stirrer

For applying the product

  • Coating trowel with triangular teeth (notch pattern 92)
  • Smoothing trowel

Mixing

First stir the base resin Fleet Cover S2B thoroughly and transfer to a mixing container. Add the sand Fleet over S2A to the resin while stirring and continue until a smooth consistency is achieved (no lumps). Then add the catalyst while stirring at the slow-speed setting and mix for 2 minutes. Make sure that the product on the base and sides of the container is mixed in. At product temperatures < 10 °C the product should be stirred for 4 minutes, as the catalyst will take longer to dissolve. 

Application

Use of notched or smoothing trowel to apply an even coat of the mixed selflevelling mortar (approx. 4.0 kg/m2 ).

Find an Installer

We're ready to help, just fill out this form and we’ll get straight back to you.

Find an installer

We use cookies. By using the website you agree with our use of cookies. For more information, please read our privacy policy.

Okay, got it!
Full screen