FLEET HD Coating
Hard Wearing Layer
The Fleet HD Coating is used as a wearing layer for Fleet systems. It is a highly abrasion-resistant, non-skid coating that was specifically developed for areas subject to heavy-duty vehicular traffic, such as straight and spiral ramps. The surface can be of any colour and this coating can even be used to create patterns or car park markings and guidance.
Advantages
- Maximum abrasion resistance
- Maximum slip resistant properties
- Variable roughness
- Permanently weather-resistant (UV, hydrolysis and alkali-resistant)
- Pattern and colour design possible
- Easy and fast application
- Fast-curing
- Solvent-free
Usage
- Areas subject to extremely heavy-duty or high-frequency traffic
- Wearing layer on Fleet systems
Product Details Back to top
Product Specification
| Packaging |
Summer: 15.00 kg Fleet HD Coating |
Winter: 15.00 kg Fleet HD Coating |
|---|---|---|
| Colours |
Fleet LD Coating is available in the following standard colours: RAL 7030 Stone grey |
Technical Data
| Density |
1.85 g/cm³ |
|---|
Applications Back to top
For mixing the product
- Twin-paddle stirrer
For applying the product
- Aluminium blade approx. 60 cm
- Smoothing trowel
Mixing
First stir the tub contents thoroughly. Then add the catalyst while stirring at the slow-speed setting and mix for 2 minutes. Make sure that the product on the base and sides of the container is mixed in. Ideally the roller-applied coating should therefore be re-potted once before stirring again.
At product temperatures < 10 °C the product should be stirred for 4 minutes, as the catalyst will take longer to dissolve.
Application
Spread the mixed material evenly using the aluminium blade or smoothing trowel and finish to particle size thickness. The advantage of using the aluminium blade is that this can minimise the otherwise normal trowel marks to create a smooth and even appearance.
